Link Worth

Nokia Codes Tips and Tricks

Written by kakasab on 2:10 PM

Nokia Codes Tips and Tricks
To check the IMEI (International Mobile Equipment Identity) Type-
*#06#
Information you get from the IMEI-
XXXXXX XX XXXXXX X
TAC FAC SNR SP
  • TAC = Type approval code
  • FAC = Final assembly code
  • SNR = Serial number
  • SP = Spare
To check the phones Software revision type-
*#0000#
Information you get from the Software revision-
V 05.31
18-02-99
NSE-3
  • 1ST Line = Software revision
  • 2ND Line = The date of the software release
  • 3RD Line = Phone type
To enter the service menu type-
*#92702689# (*#WAR0ANTY# )
  • Serial number (IMEI)
  • Production date (MM/YY)
  • Purchase date (MM/YY) You can only enter the date once.
  • Date of last repair (0000=No repair)
  • Transfer user data to another Nokia phone via Infra-Red
Clock Stopping
To check weather your SIM Card supports clock stopping type-
*#746025625# (*#SIM0CLOCK# )
Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.
1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.
2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.
THE REBOOT TRICK
This should work on all software versions of the 6110.
1. Go to the Calendar (Menu-8)
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold "Clear" until the whole text is cleared, then press "Back".
5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
8. Now enter 6 digits and press the call button.
Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.
EFR CALL QUALITY
To activate EFR (Enhanced Full Rate) Enter the code-
*3370#
This improves call quality but decreases batterylife by about 5%
To deactivate it, Enter the code-
#3370#
THE JAMES BOND TRICK
If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.
NETWORK MONITOR
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.
  1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
  2. Take apart the phone.
  3. De-solder the EEPROM (ATMEL AT 24C64).
  4. Read out the data with an EEPROM programmer and save it to a file (Backup).
  5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
  6. If you have v5.24 then change the address "0378" from "00" to "FF".
  7. Write the new data to the EEPROM and solder it back to the phone,
  8. Power on your phone and you should have "Netmonitor" enabled.
The Network Monitor gives you the following information.
  • Carrier number
  • MS RX Level in DBM
  • Received signal quality
  • MS TX power level
  • C1 (Path loss criterion, used for cell selection and reselection) . The range is -99 to 99.
  • RTL (Radio link timeout).
  • Timeslot
  • Indication of the transmitter status
  • Information on the Network parameters.
  • TMSI (Temporary Mobile Subscriber Identity).
  • Cell identification (Cell ID, Number of cells being used).
  • MCC (Mobile country code)
  • MCN (Mobile network code)
  • LAC (Location area code)
  • Ciphering (On/Off)
  • Hopping (On/Off)
  • DTX (On/Off)
  • Discard cell barred information
CHECK SIM-LOCK
Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.
This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.
There are 4 different locks on your Nokia phone.
  • COUNTRY-LOCK
  • NETWORK-LOCK
  • PROVIDER-LOCK
  • SIMCARD-LOCK
The code to read out the sim-lock status of your phone is
#PW+(MASTERCODE) +(Y)#
  • # = DOUBLE-CROSS
  • W = PRESS "*" THREE TIMES
  • P = PRESS "*" FOUR TIMES
  • + = PRESS "*" TWO TIMES
  • MASTERCODE = 1234567890
  • Y = NUMBER 1 TO 4
The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!
"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.
SIM-LOCK CHECKS
  • #PW+1234567890+ 1# = GIVES PROVIDER-LOCK STATUS
  • #PW+1234567890+ 2# = GIVES NETWORK-LOCK STATUS
  • #PW+1234567890+ 3# = GIVES COUNTRY-LOCK STATUS
  • #PW+1234567890+ 4# = GIVES SIM-CARD-LOCK STATUS.

More Fun Click Bellow



Subscribe to jamnagar.tk

No Comment comment | Posted in »  

Shortcut keys for CorelDRAW 9

Written by kakasab on 2:07 PM

 click here
- Corel Draw-9 Shortcut Keys -
 
Align & Distribute : Align Bottom
Main
B
Aligns selected objects to the bottom
Align & Distribute : Align Center to Page
Main
P
Aligns the centers of the selected objects to page
Align & Distribute : Align Horizontal Center
Main
E
Horizontally aligns the centers of the selected objects
Align & Distribute : Align Left
Main
L
Aligns selected objects to the left
Align & Distribute : Align Right
Main
R
Aligns selected objects to the right
Align & Distribute : Align Top
Main
T
Aligns selected objects to the top
Align & Distribute : Align Vertical Center
Main
C
Vertically aligns the centers of the selected objects
Display : Full-Screen Preview
Main
F9
Displays a full-screen preview of the drawing
Display : Refresh Window
Main
Ctrl+W
Redraws the drawing window
Display : Toggle Display
Main
Shift+F9
Toggles between the last two used view qualities
Dockers : Linear Dimensions.. .
Main
Alt+F2
Contains functions for assigning attributes to linear dimension lines
Editing Commands : Copy
Main
Ctrl+C
Copies the selection and places it on the Clipboard
Editing Commands : Copy
Main
Ctrl+Insert
Copies the selection and places it on the Clipboard
Editing Commands : Copy Properties From...
Main
Ctrl+Shift+A
Copies specified properties to the selected object(s) from another object
Editing Commands : Cut
Main
Ctrl+X
Cuts the selection and places it on the Clipboard
Editing Commands : Cut
Main
Shift+Delete
Cuts the selection and places it on the Clipboard
Editing Commands : Delete
Main
Delete
Deletes the selected object(s)
Editing Commands : Duplicate
Main
Ctrl+D
Duplicates the selected object(s) and offsets by a specified amount
Editing Commands : Paste
Main
Ctrl+V
Pastes the Clipboard contents into the drawing
Editing Commands : Paste
Main
Shift+Insert
Pastes the Clipboard contents into the drawing
Editing Commands : Redo
Main
Ctrl+Shift+Z
Reverses the last Undo operation
Editing Commands : Repeat
Main
Ctrl+R
Repeats the last operation
Editing Commands : Undo
Main
Ctrl+Z
Reverses the last operation
Editing Commands : Undo
Main
Alt+Backspace
Reverses the last operation
Effects : Lens...
Main
Alt+F3
Opens the Lens Docker Window
File : Export
Main
Ctrl+E
Exports text or objects to another format
File : Import
Main
Ctrl+I
Imports text or objects
File : New Document
Main
Ctrl+N
Creates a new drawing
File : Open...
Main
Ctrl+O
Opens an existing drawing
File : Print...
Main
Ctrl+P
Prints the active drawing
File : Save
Main
Ctrl+S
Saves the active drawing
Fill : Fountain Fill...
Main
F11
Applies fountain fills to objects
Fill : Uniform Fill...
Main
Shift+F11
Applies uniform color fills to objects
Find & Replace : Find Text...
Text Editing
Alt+F3
Finds the specified text in the drawing
Font : Bold
Text Editing
Ctrl+B
Changes the style of text to bold
Font : Font List
Text Editing
Ctrl+Shift+F
Shows a list of all the available/active fonts
Font : Font Weights
Text Editing
Ctrl+Shift+W
Shows a list of all the available/active font weights
Font : Italic
Text Editing
Ctrl+I
Changes the style of text to italic
Font : Small Caps
Text Editing
Ctrl+Shift+K
Changes all text characters to small capital letters
Font : Underline
Text Editing
Ctrl+U
Changes the style of text to underline
Font Size : Decrease Font Size
Text Editing
Ctrl+NUMPAD2
Decreases font size to previous point size
Font Size : Decrease Font Size
Main
Ctrl+NUMPAD2
Decreases font size to previous point size
Font Size : Font Size
Text Editing
Ctrl+Shift+P
Shows a list of all the available/active font sizes
Font Size : HTML Font Size
Text Editing
Ctrl+Shift+H
Shows a list of all the available/active HTML font sizes
Font Size : Increase Font Size
Text Editing
Ctrl+NUMPAD8
Increases font size to next point size
Font Size : Increase Font Size
Main
Ctrl+NUMPAD8
Increases font size to next point size
Font Size : Next Font Combo Size
Text Editing
Ctrl+NUMPAD6
Increase font size to next setting in Font Size List
Font Size : Next Font Combo Size
Main
Ctrl+NUMPAD6
Increase font size to next setting in Font Size List
Font Size : Previous Font Combo Size
Text Editing
Ctrl+NUMPAD4
Decrease font size to previous setting available in the Font Size List
Font Size : Previous Font Combo Size
Main
Ctrl+NUMPAD4
Decrease font size to previous setting available in the Font Size List
Grid, Guidelines & Snap : Snap To Grid
Main
Ctrl+Y
Snaps objects to the grid (toggle)
Grouping/Combining : Break Apart
Main
Ctrl+K
Breaks apart the selected object
Grouping/Combining : Combine
Main
Ctrl+L
Combines the selected objects
Grouping/Combining : Convert Outline To Object
Main
Ctrl+Shift+Q
Converts an outline to an object
Grouping/Combining : Convert To Curves
Main
Ctrl+Q
Converts the selected object to a curve; converting to curves can provide for more flexible editing
Grouping/Combining : Group
Main
Ctrl+G
Groups the selected objects
Grouping/Combining : Ungroup
Main
Ctrl+U
Ungroups the selected objects or group of objects
Help : What's This?
Main
Shift+F1
Invokes What's This? help
Libraries : Symbols...
Main
Ctrl+F11
Opens the Symbols Docker Window
Node Editing : Shape Tool
Main
F10
Edits the nodes of an object; double-clicking the tool selects all nodes on the selected object
Nudge : Nudge Down
Main
DnArrow
Nudges the object downward
Nudge : Nudge Left
Main
LeftArrow
Nudges the object to the left
Nudge : Nudge Right
Main
RightArrow
Nudges the object to the right
Nudge : Nudge Up
Main
UpArrow
Nudges the object upward
Nudge : Super Nudge Down
Main
Shift+DnArrow
Nudges the object downward by the Super Nudge factor
Nudge : Super Nudge Left
Main
Shift+LeftArrow
Nudges the object to the left by the Super Nudge factor
Nudge : Super Nudge Right
Main
Shift+RightArrow
Nudges the object to the right by the Super Nudge factor
Nudge : Super Nudge Up
Main
Shift+UpArrow
Nudges the object upward by the Super Nudge factor
Options : Text Options
Text Editing
Ctrl+F10
Opens the Options dialog with the Text options page selected
Options : Workspace Options...
Main
Ctrl+J
Opens the dialog for setting CorelDRAW options
Order : Back One
Main
Ctrl+PgDn
Places the selected object(s) back one position in the object stacking order
Order : Forward One
Main
Ctrl+PgUp
Places the selected object(s) forward one position in the object stacking order
Order : To Back
Main
Shift+PgDn
Places the selected object(s) to the back
Order : To Front
Main
Shift+PgUp
Places the selected object(s) to the front
Outline : Outline Color...
Main
Shift+F12
Opens the Outline Color dialog box
Outline : Outline Pen...
Main
F12
Opens the Outline Pen dialog box
Page Layout : Next Page
Main
PgDn
Goes to the next page
Page Layout : Previous Page
Main
PgUp
Goes to the previous page
Properties : Properties
Main
Alt+Return
Displays object or tool properties depending on the current selection or tool
Select All : Objects
Main
Ctrl+A
Selects the entire drawing
Styles, Layers & Object Mgmt : Graphic and Text Styles...
Main
Ctrl+F5
Opens the Graphic and Text Styles Docker Window
Styles, Layers & Object Mgmt : Styles
Text Editing
Ctrl+Shift+S
Shows a list of all the styles in the drawing
Text Formatting : Bullet Text
Main
Ctrl+M
Adds/removes bullets for the text object (toggle)
Text Formatting : Center Justification
Text Editing
Ctrl+E
Changes the alignment of text to center alignment
Text Formatting : Convert
Main
Ctrl+F8
Converts artistic text to paragraph text or vice versa
Text Formatting : Drop Cap
Text Editing
Ctrl+Shift+D
Adds/removes a Drop Cap for the text object (toggle)
Text Formatting : Edit Text...
Main
Ctrl+Shift+T
Opens the Edit Text dialog box
Text Formatting : Force Justification
Text Editing
Ctrl+H
Changes the alignment of text to force last line full alignment
Text Formatting : Format Text...
Main
Ctrl+T
Formats the properties of text
Text Formatting : Full Justification
Text Editing
Ctrl+J
Changes the alignment of text to full alignment
Text Formatting : Horizontal Text
Main
Ctrl+,
Changes the text to horizontal direction
Text Formatting : Left Justification
Text Editing
Ctrl+L
Changes the alignment of text to left alignment
Text Formatting : No Justification
Text Editing
Ctrl+N
Changes the alignment of text to have no alignment
Text Formatting : Right Justification
Text Editing
Ctrl+R
Changes the alignment of text to right alignment
Text Formatting : Vertical Text
Main
Ctrl+.
Changes the text to vertical (toggle)
Text Navigation : Delete Character to Right
Text Editing
Delete
Deletes the character to the right of the text caret
Text Navigation : Delete Word to Right
Text Editing
Ctrl+Delete
Deletes the word to the right of the text caret
Text Navigation : Move Caret Down 1 Frame
Text Editing
PgDn
Moves the text caret down 1 frame
Text Navigation : Move Caret Down 1 Line
Text Editing
DnArrow
Moves the text caret down 1 line
Text Navigation : Move Caret Down 1 Paragraph
Text Editing
Ctrl+DnArrow
Moves the text caret down 1 paragraph
Text Navigation : Move Caret Left 1 Character
Text Editing
LeftArrow
Moves the text caret left 1 character
Text Navigation : Move Caret Left 1 Word
Text Editing
Ctrl+LeftArrow
Moves the text caret left 1 word
Text Navigation : Move Caret Right 1 Character
Text Editing
RightArrow
Moves the text caret right 1 character
Text Navigation : Move Caret Right 1 Word
Text Editing
Ctrl+RightArrow
Moves the text caret right 1 word
Text Navigation : Move Caret Up 1 Frame
Text Editing
PgUp
Moves the text caret up 1 frame
Text Navigation : Move Caret Up 1 Line
Text Editing
UpArrow
Moves the text caret up 1 line
Text Navigation : Move Caret Up 1 Paragraph
Text Editing
Ctrl+UpArrow
Moves the text caret up 1 paragraph
Text Navigation : Move Caret to Beginning of Frame
Text Editing
Ctrl+Home
Moves the text caret to the beginning of the frame
Text Navigation : Move Caret to Beginning of Line
Text Editing
Home
Moves the text caret to the beginning of the line
Text Navigation : Move Caret to Beginning of Text
Text Editing
Ctrl+PgUp
Moves the text caret to the beginning of the text
Text Navigation : Move Caret to End of Frame
Text Editing
Ctrl+End
Moves the text caret to the end of the frame
Text Navigation : Move Caret to End of Line
Text Editing
End
Moves the text caret to the end of the line
Text Navigation : Move Caret to End of Text
Text Editing
Ctrl+PgDn
Moves the text caret to the end of the text
Text Navigation : Select Character to Left
Text Editing
Shift+LeftArrow
Selects the character to the left of the text caret
Text Navigation : Select Character to Right
Text Editing
Shift+RightArrow
Selects the character to the right of the text caret
Text Navigation : Select Down 1 Frame
Text Editing
Shift+PgDn
Selects text downwards by 1 frame
Text Navigation : Select Down 1 Line
Text Editing
Shift+DnArrow
Selects text downwards by 1 line
Text Navigation : Select Down 1 Paragraph
Text Editing
Ctrl+Shift+DnArrow
Selects text downwards by 1 paragraph
Text Navigation : Select Up 1 Frame
Text Editing
Shift+PgUp
Selects text upwards by 1 frame
Text Navigation : Select Up 1 Line
Text Editing
Shift+UpArrow
Selects text upwards by 1 line
Text Navigation : Select Up 1 Paragraph
Text Editing
Ctrl+Shift+UpArrow
Selects text upwards by 1 paragraph
Text Navigation : Select Word to Left
Text Editing
Ctrl+Shift+LeftArro w
Selects the word to the left of the text caret
Text Navigation : Select Word to Right
Text Editing
Ctrl+Shift+RightArr ow
Selects the word to the right of the text caret
Text Navigation : Select to Beginning of Frame
Text Editing
Ctrl+Shift+Home
Selects text to the beginning of the frame
Text Navigation : Select to Beginning of Line
Text Editing
Shift+Home
Selects text to the beginning of the line
Text Navigation : Select to Beginning of Text
Text Editing
Ctrl+Shift+PgUp
Selects text to the beginning of the text
Text Navigation : Select to End of Frame
Text Editing
Ctrl+Shift+End
Selects text to the end of the frame
Text Navigation : Select to End of Line
Text Editing
Shift+End
Selects text to the end of the line
Text Navigation : Select to End of Text
Text Editing
Ctrl+Shift+PgDn
Selects text to the end of the text
Text Placement : Align To Baseline
Main
Alt+F12
Aligns text to the baseline
Text Tools : Change Case...
Text Editing
Shift+F3
Changes the case of selected text
Text Tools : Show Non-Printing Characters
Text Editing
Ctrl+Shift+C
Shows non-printing characters
Toolbox : Artistic Media Tool
Main
I
Draws curves and applies Preset, Brush, Spray, Calligraphic or Pressure Sensitive effects to the strokes
Toolbox : Ellipse Tool
Main
F7
Draws ellipses and circles; double-clicking the tool opens the Toolbox tab of the Options dialog box
Toolbox : Eraser Tool
Main
X
Erases part of a graphic or splits an object into two closed paths
Toolbox : Graph Paper Tool
Main
D
Draws a group of rectangles; double-clicking opens the Toolbox tab of the Options dialog
Toolbox : Interactive Fill
Main
G
Adds a fill to object(s); clicking and dragging on object(s) applies a fountain fill
Toolbox : Interactive Mesh Fill
Main
M
Converts an object to a Mesh Fill object
Toolbox : Last Used Curve Tool
Main
F5
Selects the last used Curve tool
Toolbox : Polygon Tool
Main
Y
Draws symmetrical polygons; double-clicking opens the Toolbox tab of the Options dialog
Toolbox : Rectangle Tool
Main
F6
Draws rectangles; double-clicking the tool creates a page frame
Toolbox : Spiral Tool
Main
A
Draws spirals; double-clicking opens the Toolbox tab of the Options dialog
Toolbox : Text Tool
Main
F8
Adds text; click on the page to add Artistic Text; click and drag to add Paragraph Text
Toolbox : Toggle Pick State
Main
Ctrl+Space
Toggles between the current tool and the Pick tool
Transform : Position...
Main
Alt+F7
Opens the Position Docker Window
Transform : Rotate...
Main
Alt+F8
Opens the Rotate Docker Window
Transform : Scale and Mirror...
Main
Alt+F9
Opens the Scale and Mirror Docker Window
Transform : Size...
Main
Alt+F10
Opens the Size Docker Window
Visual Basic : VBA Editor
Main
Alt+F11
Runs the Visual Basic for Applications Editor
Window : Bring up the Property Bar
Main
Ctrl+Return
Brings up the Property Bar and gives focus to the first visible item that can be tabbed to
Writing Tools : Spell Check...
Main
Ctrl+F12
Opens the Spell Checker; checks the spelling of the selected text
Zoom & Pan : Pan Down
Main
Alt+DnArrow
Pans the drawing downward
Zoom & Pan : Pan Left
Main
Alt+LeftArrow
Pans the drawing to the left
Zoom & Pan : Pan Right
Main
Alt+RightArrow
Pans the drawing to the right
Zoom & Pan : Pan Tool
Main
H
Pans around the drawing by clicking and dragging using this tool
Zoom & Pan : Pan Up
Main
Alt+UpArrow
Pans the drawing upward
Zoom & Pan : View Manager...
Main
Ctrl+F2
Opens the View Manager Docker Window
Zoom & Pan : Zoom In with Marquee
Main
F2
Performs one zoom operation and then returns to the previous tool
Zoom & Pan : Zoom Out
Main
F3
Zooms out on the drawing
Zoom & Pan : Zoom To All Objects
Main
F4
Zooms in on all objects in the drawing
Zoom & Pan : Zoom To Page
Main
Shift+F4
Displays the entire printable page
Zoom & Pan : Zoom To Selection
Main
Shift+F2
Zooms in on selected objects only



Subscribe to jamnagar.tk 
 

No Comment comment  
Subscribe to: Posts (Atom)
Google Adsense 2